Taylor 1526 Manual do Utilizador

WeatherGuide™System with Remote SensorInstruction Manual1by1526

To turn off the alarm:Press “MODE” until the Alarm display ap-pears. Press the “SET/AL” button. Thealarm icon will disappear. The alarm isturned off.S

11How to read your WeatherGuide™The base unit displays indoor conditions from its location.The remote unit will transmit weather readings from its loc

12Auto Scroll feature – the base unit canbe set to automatically scroll through read-ings. To activate Auto Scroll, press the“Channel” button on the b

ToView Minimum/Maximumtemperature/humidity readingsYour WeatherGuide™ will store the lastrecorded high and low temperatures andhumidity levels over a

14Temperature Trend IndicatorsYour WeatherGuide™ will indicate if temperatures are rising, falling,or steady.indicates Rising Temperatures readings(te

12-24 Hour Weather ForecastYour WeatherGuide™ will estimate weather conditions over the next12 to 24 hours.These estimates are based on altitude and c

16Backlight FeatureThe base unit has a backlight for easy viewing of the screen. Press the“Snooze/Light” button to turn the backlight on for 3 seconds

17Trouble-ShootingDisconnected SignalsIf the receiver unit does not receive a transmission from a remote chan-nel for 1 hour, the display will show da

18Transmission CollisionSignals from other household devices, such as doorbells, home securitysystems and entry controls, may interfere.This is normal

19Precautions1. The receiver is intended for indoor use only. It is not sealed againstmoisture and could be damaged if used outdoors.2. Do not immerse

Welcome to theTaylor®WeatherGuide System. Simple, reliable,accurate…it allows you to monitor indoor or outdoor locations fromone room. The base unit r

201526 8.08One Year WarrantyThis product is warranted against defects in materials or workmanshipfor one (1) year from date of original purchase. It d

To Power your WeatherGuide™Base UnitYour WeatherGuide™ base unit is powered by 2 AAA batteries (notincluded).Remove the battery compartment cover on t

If the transmission is successful,the remotesensor readings and a “ ” icon will appearon the base unit. If dashes are still displayedon the receiver u

How to Display your WeatherGuide™Table top – use the Table Stand on the back of the base and remotesensor unitsWall – use the keyhole on the back of t

Atomic Clock and CalendarYour WeatherGuide™ has a radio-controlled clock/calendar that setsitself to the radio signal transmitted by the U.S.Atomic Cl

7How to Set the Clock ManuallyTo manually set the clock:1. Press and hold the “SET/AL” button.The unit will beep.2. Press “+C/F” or “-PMCE/RCC” toset

Tip: Hold down the “+C/F” or“-PMCE/RCC” buttons to advance the dig-its quickly.Daylight Savings Time – to turn DSTon, press “MODE” until “OFF” appears

2. Press and hold the “SET/AL” button.Theunit will beep and the alarm’s hour digitswill flash.3. Press “+C/F” or “-PMCE/RCC” tochange the hours. Press